Four Am

Four Am Bloggers Hub

The Best Way to Cool your Computers


Computers have been a significant element in our daily lives from the early 1990’s. It was just a matter of time before they became essential to working and playing. While we appreciate the many benefits of computers however, it generates lots of heat. In time this heat can cause harm to your computer, and reduce the performance of your computer. To prevent any problems from occurring, you must invest in some phase-change materials that can chill your system. Here are some suggestions and tricks to use with cooling your PC with phase change materials:

What are the materials that undergo a phase change?

Materials that change phase are usually employed in offices and homes to regulate temperature levels. These materials are known as phase change materials since it transforms from liquid to solid when heated.

Why do we need computers cooling?

The typical desktop computer is used for 8 hours or more per day. This is a long time for temperature to rise and cause problems. In the event of overheating, your computer could to fail or crash. Also, it can reduce the lifespan of your computer because all that heat can affect the components. However, there are simple ways to get rid of this problem without having to shell out lots of money purchasing new components for your computer.

Phase change materials are a solution to this problem. They’re a low-cost option that doesn’t require any extra effort on your behalf. All you need are zip ties and you’re good to go!

It is enough to cut a circular piece inside the back of the case and run the cord through it in order to keep the PCM in a close position for it to work. After that, tie zip ties around the cord to keep it in place, while avoiding any injury from possible pulling or pulling.

PCMs are a cool option for computers that won’t break the budget. With the use of phase change materials they can help lower heat buildup and keep the speed of your computer at just $10 per calendar year!

How do you cool computers?

PCMs are create from a chemical with an extremely low melting point as well as extremely high boiling temperature. They function through being situate between the PC’s heat source and PC’s heat sink. It is able to disperse the heat into the air. They are effective because they are able to absorb large amounts of energy from heat in a short amount of time and not be damage. If the PCM is overheat, it will melt and releases the stored energy. This cycle repeats itself until the PCM is solid again.

Is this the most suitable kind of PCM for the system I have?

There are a variety material that can be use to change the phase however the one that works the best fit for your system will depend on your PC’s model and maker. It is the first thing to figure out the kind of cooling system your PC requires. In order to do this, you’ll have to identify the processor on your PC and check if it’s within any of these categories.

Most computers come by a fan, or cooling device that helps to dissipate excess heat generated by the CPU. It is the next thing to do, which is figure out whether you require additional cooling. If you do, you’ll require a phase change material that is place between the fan and the processor. This kind of material can be use as a gel or gel, and can assist in cooling down almost any type of CPU.

If you do not possess a cooling fan, or any other type of cooling device, there are materials that change phase which can be use to replace the components. The “active” PCM products include an air-cooling system that blows ambient air across the refrigerant layer and then reduces the temperature of the air before passing it through your processor. Active PCMs offer the most efficient method of eliminate the heat of your computer as they can be use at temperatures as low as 30 degrees Celsius!

How do you Install your PCM

Materials that change phase are called PCMs. They are made to take in hot energy and then disperse it slowly , instead of all at once which could result in damage to your computer. PCMs come in a variety of types, including pellets or chips which are place over the more hot elements of your PC. Chips are best suite to small computers, whereas pellets work best on larger computers.

In order to install the PCM the primary step to take is wash your PC so that there’s no dirt or other debris that could hinder the performance of your computer. After that, you must locate a spot that is not obvious that you’d like to place the PCM. It should be locate near to the source of airflow, so that it can be cooled properly. When you have found the perfect location, open your PC and place the PCM over the component that is heating up (usually that’s your processor). Be sure not to block any vents or fans which could block the flow of air! It is also possible to make adjustments to any cables that got blocking the installation.

For more details about the ways phase change materials can cool your computer, take a look at this blog article!


Phase change materials are a environmentally sustainable and less impactful alternative to conventional refrigeration and air conditioners. PCM’s make use of water and a certain kind of wax in order to trap heat and release it. They are able to be used in conjunction with air conditioning or used alone for cooling your computer. PCMs will work only when it’s properly installed and is in the correct location to work with your system. Once you know how to install your PCM, you’ll be able to cool your computer with a more sustainable and environmentally-friendly option.